전산유체연구실 소개 및 주요연구분야
Bubble Collapse Near Wall
Evolution of bubble shape near a free surface (with splash)
< Single Bubble >
< Two Bubbles >
Shock Wave Propagation Near Cylinder (UNDEX)
UNDEX with thermodynamics effects
Bubble collapsing with heat and mass transfer effects
Complex free surface splashing behavior
UNDEX beneath a free surface
Three-Dimensional Shock Bubble Interaction
Full Fluids Equation Solver
Free Surface Analysis
Water Impact Analysis_Freely Falling Inclined Wedge
Water Impact Analysis_Freely Falling Wedge
Surface Tension Effects
Without Surface Tension With Surface Tension
Water Impact Analysis_6DOF water entry behavior of solid cylinder
High Speed Water Entry (6DOF)
Moving chimera grid for solid cylinder
Solid cylinder Hollow cylinder 1 Hollow cylinder 2
(M=2100kg) (M=250kg) (M=250kg)
RAMICS (RAPID AIRBORNE MINE CLEARANCE SYSTEM)
Single Bullet Two Bullet
Ricochet (Skipping) of High Speed Object
Ricochet (Skipping) of High Speed Objects
Disk with Gravity Effect : Ventilated Cavitation
Ventilated Cavitation with High Temperature Compressible Effects
Supercavitating Torpedo: Hot gas exhaust / ventilation
High-Speed Underwater Bullet (AHSUM)
Comparison with KRISO’s Experiment
Complex free surface splashing behavior
장보고-III Batch-II 탐색 개발 위탁 연구
1. 수직, 수평발사에 대한 전산해석
2. 전산해석을 통한 함-무장 간 안정성 및 연속 발사 조건 확인
원전 안전해석 규제기술 선진화를 위한 기초 열수력 모델 개발 및 코드 개선
- 잠수함 후류 영향을 적용한 수중 운동체 주위의 유동 현상 해석
(Flow phenomena analysis around the underwater vehicle that applies the submarine wake effect) - 비응축성 가스를 적용한 수중 운동체 주위의 유동 현상 해석
(Flow phenomena analysis around the underwater vehicle that applies the non-condensable gas) - 수중 운동체 동 유체력 변화 해석.
(Analysis of the change in underwater vehicle fluid force)
→ 수중 운동체 캐비테이션 거동 및 유체력 변화 해석 코드 정립
- CFD 기법을 이용한 풍력 터빈 블레이드 유동 전산해석
(computational analysis of the wind turbine blade flow using CFD) - 풍력 터빈 블레이드 기본 성능 해석
(Basic performance analysis of a wind turbine blade)
- 고압에 의해 발사되는 어뢰 유동 해석
(Flow analysis torpedo fired by high pressure) - 어뢰가 발사시 어뢰 주변 압력분포 해석
(Pressure distribution analysis in the around torpedo)
- 항공기 익형의 역설계를 통한 최적역설계 코드의 검증
(Verification of optimum reverse engineering code through reverse engineering of the wing type of aircraft) - 터보기계 임펠러 형상의 최적설계기술 개발
(Development of optimal design technology of turbo machinery impeller geometry) - 검증된 코드를 이용한 유체기계 임펠러 형상 최적 설계 수행
(The fluid machine impeller shape design optimization using a code that has been verified) - 최적설계 알고리즘을 이용한 성능 향상
(Improvement of performance using the optimal design algorith)
- 표준 smagorinsky 모델 및 dynamic 모델을 적용하여 고정도의 난류코드 개발
(Development of turbulence code of high precision by applying the dynamic model and standard smagorinsky model) - GMRES 방법 적용에 의한 해의 수렴성 및 안정성 검증
(Verification of the value of stable state and convergence by applying GMRES method)
- 수중운동체에 관련된 연구개발을 통한 요소기술의 확보
(Secure technical factor through development related to underwater vehicl.) - 잠수함 및 어뢰에 대한 수중 유동해석
(Water flow analysis of the torpedo and submarine) - Cavitation 유동 해석
(Cavitation flow analysis) - 초월공동기술을 응용한 차세대 수중무기 개발에 대한 연구
(A study on the development of the next generation of underwater weapons that utilize Supercavitation) - 잠수함 수중발사 미사일에 대한 유동해석
(Flow analysis of underwater submarine launch missile)
- 자동차 주위의 multiblock 격자 형성을 위한 알고리즘 개발
(Development of an algorithm for forming a multiblock grid surrounding the vehicle) - 자동차 주위 유동 해석을 위한 프로그램 개발
(Program development for the surrounding flow analysis of vehicle) - 자동차 해빙(defrost) 성능 향상을 위한 해석 프로그램 개발
(Development of analysis program to improve performance of vehicle defroster) - 자동차 전면 유리창 김서림 자동방지 시스템 개발
(Development of automatic anti-fogging system front windshield of the vehicle)
- M=0.25(300km/h)로 고속주행하는 고속전철 주위의 공기역학적 특성규명
(Aerodynamic characterization around the high-speed[(300 km / h) M = 0.25] KTX) - 고속으로 터널 진입시 압축파의 생성과 교란에 따른 공력소음, 진동문제 해결을 위한 압축파 해석
(Compression wave analysis to solve aerodynamic noise caused by the disturb and the problem of vibration) - sliding block (이동격자) 기법을 적용한 비정상 압축성 3-D Navier-Stokes 방정식 코드 개발
(Code development of 3-D Navier-Stokes equations of unsteady compressible applying the sliding block technology (moving grid))
- 제트 펌프의 성능향상을 위한 연구
(Research to improve the performance of the jet pump) - 3차원 제트 펌프의 격자 생성과 유동장 해석
(Flow field analysis and grid generation of three-dimensional jet pump) - Parametic study를 통한 성능 향상의 모색
(Study to improve the performance by the Parametic study) - 단면축소관내의 2차 유동 특성 및 역 압력 구배가 존재하는 확대부에서의 난류모델링
(Turbulence modeling in the expanded section where the secondary flow Characteristics and back pressure gradient of cross section reduction pipes)
- Air poket의 발생 및 체적을 예측하기 위한 성형해석 기법 확립
(Establishment of forming analysis method for predicting the volume and generation of Air poket) - 발생이 예상되는 Air Pocket에 대한 근사 체적 화 기법 정립
(Establishment of closely volume technology for Air Pocket expected to occur) - Air Pocket 내의 압력분포를 예측하기 위한 유동해석 기법 확립
(Establishment of flow analysis techniques to predict the pressure distribution within the Air Pocket) - Air Vent Hole의 면적과 수량 선정을 위한 프로그램 개발
(Program development for the selection of the amount and area of Air Vent Hole)
- 응축 덕트 내부 이상 유동의 물리적 이해
(Physical understanding of 2 phase flow in the condensation duct) - 이상 유동을 동반한 열전달 및 습공기의 응축 매커니즘 파악 응축수 절감, 건조성능 개선
(Understanding of the mechanism of condensation moist air and heat transfer with the 2 phase flow. condensate water reduction, dry performance improvement) - 세탁,건조기,건조겸용 적용 가능한 이상 유동 해석법 개발
(Development of 2 phase flow flow analysis techniques can be Applicable in the washing machine, dryer)